Brake line bending pliers
Pipe bending pliers, brake line
BRAKE LINE BENDING PLIERS 4.75MM/5MM
Register now and access more than 125,000 products
- Unintentional bending during the working process is avoided.
- No scraping damage to the outer insulation.
- The front-mounted rollers enable work in confined areas.
Brake lines of 6 mm in diameter can be bent using the bending roller conversion kit (art. no. 0997797068).
When replacing the brake lines or repairing parts, it is necessary to postform the brake line.
Length | 235 mm |
Min. diameter | 4.75 mm |
Max. diameter | 5 mm |
Min./max. diameter | 4.75-5 mm |
Product weight (per item) | 400.000 g |
Material | Hardened steel |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Double flat spring contact VF 6.3 Uninsulated
French, joiners' hammer German design in accordance with DIN 5109
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Castellated nut, low profile DIN 979, steel 05, zinc-plated, blue passivated (A2K)
Rust Stop primer
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
EPS profile thumbturn cylinder
Profile system
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagonal bolt with shank DIN 931, steel 8.8, plain
