Brass, metric, EMC cable gland in accordance with EN 60423 with contact spring
Cable gland metric MS EMC contact spring
CBLGLND-EMVD-M25X1,5-WS27-11-16MM
Register now and access more than 125,000 products
- Integrated strain relief
- Torsion guard
- Large sealing and clamping range
- Easy to install
- From M32x1.5 with O-ring
- Stainless steel contact spring
- Made in Germany
Datasheets(X)
For cables and lines with shielding
 | |
Connection thread | M25 x 1.5 |
Min./max. cable diameter | 11-16 mm |
Thread length (metric thread) | 7 mm |
Width across flats (SW) | 27 mm |
Min./max. temperature conditions | -20 to 100 °C |
IP protection class | IP 68 |
Max. pressure | 5 bar |
Material | Brass |
Surface | Nickel plated |
Material of sealing ring | Polychloroprene nitrile rubber CR/NBR, halogenic |
Material of sealing ring for the connection thread | Nitrile natural rubber NBR |
Material of lamellar insert | PA 6 V-2 - Polyamide 6 V-2 |
Last viewed
Design grille Design 1, point
Combination wrench, ultra slim
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Jacket Planam BW 290
Chiptronic locking bolt For sliding doors, revolving doors and drawers
Helical insert W.TEC® INSERT COIL Free Running
Sandpaper strip Useit® Superpad vehicle
Welding wire Steel SG 3
Trizact® hook-and-loop fabric disc
HSCo8 keyway end mill, short, twin blade, centre-cutting DIN 327D