Brass, metric, EMC cable gland in accordance with EN 60423 with contact spring
Cable gland metric MS EMC contact spring
CBLGLND-EMVD-M32X1,5-WS34-14-21MM
Register now and access more than 125,000 products
- Integrated strain relief
- Torsion guard
- Large sealing and clamping range
- Easy to install
- From M32x1.5 with O-ring
- Stainless steel contact spring
- Made in Germany
Datasheets(X)
For cables and lines with shielding
 | |
Connection thread | M32 x 1.5 |
Min./max. cable diameter | 14-21 mm |
Thread length (metric thread) | 8 mm |
Width across flats (SW) | 34 mm |
Min./max. temperature conditions | -20 to 100 °C |
IP protection class | IP 68 |
Max. pressure | 5 bar |
Material | Brass |
Surface | Nickel plated |
Material of sealing ring | Polychloroprene nitrile rubber CR/NBR, halogenic |
Material of sealing ring for the connection thread | Nitrile natural rubber NBR |
Material of lamellar insert | PA 6 V-2 - Polyamide 6 V-2 |
Last viewed
Linear grid with fern design For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels
3/8" socket wrench With multi profile, hexagon, short
Sundström protective cover SR 345
Foundry hook with eyelet, QC 10
1/2-inch impact socket wrench insert hexagon, metric, long
Weld-in bulkhead fitting ISO 8434-1, stainless steel 1.4571
Universal wire holder For VKW wiring duct
Retouching putty epoxi-stick wood
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Concealed slide full-extension slide Dynapro With integrated soft-close system