Brick and tile drill bit box 7 pieces
Brick and tile drill bit cassette 7 pcs
DRL-GENPURP-SORT-BRICK/TLE-7PCS
ZEBRA
Register now and access more than 125,000 products
Contents: 1 drill bit of dia. 4 x 75/40, 5 x 85/50, 8 x 120/80, 10 x 120/100, 12 x 150/100 and 2 drill bits of dia. 6 x 100/60
Suitable for all rotary and impact drills (also with 10 mm clamping drill chuck)
Diamond-sharpened tungsten-titanium tip with special grinding
Very long service life, even when used on particularly dense materials.
Low-current, high-temperature soldering process (1120°C)
Even the most extreme loads will not loosen the carbide plate.
Practical straight shank
- Faster clamping, virtually automatic self-clamping
- No slippage in the drill chuck
- Caution: Use drill bits only in rotating mode!
- Ensure high contact pressure
- Cool-down time: approx. 20 sec./hole
- Recommended rotation speed: approx. 600-1500 rpm
Datasheets(X)
The hardest ceramic, tiles, stoneware, clay bricks and high-fired clay up to scratch hardness 9.
Versatility (points system) | 3 of 4 points |
Service life (points system) | 2 of 4 points |
Drilling speed (point system) | 2 of 4 points |
Bore hole quality (point system) | 2 of 4 points |
Last viewed
Heat-shrink crimp Y-branch connector butt connector
Helical insert W.TEC® INSERT COIL Screw Grip
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
EPS profile double cylinder
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with metallic sealing edge, shape B
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Clamping pin/clamping sleeve ISO 13337 spring steel plain
EPS profile thumbturn cylinder
Cylindrical roller bearing FAG
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain