Burnishing roller
Burnishing roller sanding fleece/linen combined
SNDROLL-LIN/FLC-COMBI-G100/80-100X50
Register now and access more than 125,000 products
- With 6 mm wedge taper and size 19 hole for surface sanding machines
- Medium harness
- Normal corundum
- Synthetic resin-bound grinding segments
- Circumferential speed: Specified by the machine used, but no more than 30 m/s = 3700 rpm
General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wear.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.
Datasheets(X)
Suitable for matting and burnishing. Removes minor scratches from metals, hard plastics and wood
Materials to be processed: Forged steel, malleable iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.
Diameter x width x drill hole | 100 x 50 x 19 mm |
Design | With wedge taper 6 mm |
Fleece grid size | 100 |
Linen grid size | 80 |
Material of abrasive medium | Normal corundum |
Max. circumferential speed | 30 m/s |
Material to be processed | Forged steel |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
Washer For screws with a heavy clamping sleeve DIN 7349, A4 stainless steel
Stretch X trousers
Roll of emery cloth Roll of emery cloth
Partitioning set For ORSY® system case 8.4.3
Alumina zirconia hook-and-loop disc for edge sanders
ASSY® 3.0 A2 chipboard screw
Plus pipe collar Made from weather-resistant EDPM with integrated aluminium frame
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
Tallinn 3-in-1 parka