Burnishing roller
Burnishing roller sanding fleece/linen combined
SNDROLL-LIN/FLC-COMBI-G180/150-100X100
Register now and access more than 125,000 products
- With 6 mm wedge taper and size 19 hole for surface sanding machines
- Medium harness
- Normal corundum
- Synthetic resin-bound grinding segments
- Circumferential speed: Specified by the machine used, but no more than 30 m/s = 3700 rpm
General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wear.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.
Datasheets(X)
Suitable for matting and burnishing. Removes minor scratches from metals, hard plastics and wood
Materials to be processed: Forged steel, malleable iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.
Diameter x width x drill hole | 100 x 100 x 19 mm |
Design | With wedge taper 6 mm |
Fleece grid size | 180 |
Linen grid size | 150 |
Material of abrasive medium | Normal corundum |
Max. circumferential speed | 30 m/s |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Cr-Ni and other stainless steels, Steels bands, Deep-drawn steel, Injection-moulded zinc, Non-ferrous metal, Wood |
Last viewed
Plastic frame anchor W-UR 10 XXL W-UR 10 XXL
Jacket Planam Plaline
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, chrome-plated (F2J)
Work jacket
COLDMELT® anchor screw mount
Separating rail for multiple separation For 60 x 60 mm and 60 x 90 mm cable routing conduits
Sealing ring, aluminium, shape A
Wallpaper seam roller, conical shape
Uni block die-cast zinc
Engine oil TRIATHLON® Endurance III 5W-30