CERALINE matting body
Matting body CERALINE
MATBDY-COMBI-G180/120-MID-50X25X6
ZEBRA
Register now and access more than 125,000 products
Effective and very long-lasting
Ceramic abrasive grain for a well-defined grinding finish (brushed finish) and a very long service life.
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required grinding finish with quick and shoulder-free results.
Simple assignment of fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing tempering colour. For forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 50 x 25 x 6 mm |
Design | Medium |
Colour | Yellow |
Max. rotation speed | 8000 rpm |
Max. recommended rotation speed | 6000 rpm |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Round head screw with square neck DIN 603, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Insert nut WN 387 A2 stainless steel, plain
T-piece, reduced with solder connection EN1254, copper, 5130R
Stretch X trousers
Work shorts
Work vest Lynx fleece vest
Vehicle cable FLRY
Slotted countersunk head screw ISO 2009, steel 4.8, zinc-plated, blue passivated (A2K)
Craftsman's shelf cabinet