CERALINE matting body
Matting body CERALINE
MATBDY-COMBI-G80/60-EXC-40X25X6
ZEBRA
Register now and access more than 125,000 products
Effective and very long-lasting
Ceramic abrasive grain for a well-defined grinding finish (brushed finish) and a very long service life.
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required grinding finish with quick and shoulder-free results.
Simple assignment of fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing tempering colour. For forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 40 x 25 x 6 mm |
Design | Extra-coarse |
Colour | Orange |
Max. rotation speed | 9000 rpm |
Max. recommended rotation speed | 7500 rpm |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Identification rings, PVC
ASSY® 4 A2 CS fittings screw A2 stainless steel plain full thread countersunk head
Adhesive tape
Twist drill bit HSS DIN 1897 type RN
Slotted cheese head
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
Roll-in sliding block with guide bar
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)