CERALINE matting body
Matting body CERALINE
MATBDY-COMBI-G80/60-EXC-50X25X6
ZEBRA
Register now and access more than 125,000 products
Effective and very long-lasting
Ceramic abrasive grain for a well-defined grinding finish (brushed finish) and a very long service life.
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required grinding finish with quick and shoulder-free results.
Simple assignment of fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing tempering colour. For forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 50 x 25 x 6 mm |
Design | Extra-coarse |
Colour | Orange |
Max. rotation speed | 8000 rpm |
Max. recommended rotation speed | 6000 rpm |
Material to be processed | Forged steel |
Last viewed
Pneumatic hose reel DSA-S
Classic jacket
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagon head sealing plug with collar DIN 910, steel, plain
Cable gland metric, PA, reduced sealing insert
Pneumatic blow-off pen With suspension clip
Pan head screw with Z cross recess DIN 7985, A2-70 stainless steel, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Telecommunications module For hazardous materials cabinet, type 90
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)