CERALINE sanding sleeve For expansion and inflatable rollers
Fabric sanding sleeve CERALINE
SNDSLEV-FAB-CERALINE-G40-90X100MM
CERALINE
Register now and access more than 125,000 products
Extremely high and very fast material removal rate with cool grinding
High-performance sanding grain and active grinding top layer
Very long service life and low contact pressure
High-performance ceramic abrasive grain
Grinding-active additives
Very cool grinding, no material discolouration
* Brand name of Special Metals Corporation
Datasheets(X)
Ideal for surface sanding, light deburring work and removing rolling skin
Materials to be processed:
Stainless steel, rust-, acid- and heat-resistant steel (high-alloy), e.g. Inconel®*, steel and non-ferrous metals.
- At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
- Use tools with a low contact pressure; high contact pressure leads to premature wear.
- With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Diameter x width | 90 x 100 mm |
Grinding pattern | 0 - not applicable |
Max. rotation speed | 2800 1/min |
Material of abrasive medium | Ceramic grain |
Backing material | Mesh |
Colour | Red brown |
Grid size | 40 |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Pan head screw with Z cross recess DIN 7985, A4-70 stainless steel, plain
Twist drill bit HSS DIN 338 type RN 130°
Twist drill bit HSCo DIN 338 type RN oxide
Strapping clip, phosphated For Spannfix strapping system
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Long hammer handle For Simplex soft-face hammers
Protective glove, leather
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain