CERALINE vulcanised fibre disc
Vulcanised fibre disc CERALINE
FBRDISC-CG-G60+-D125X22,23MM
CERALINE
Register now and access more than 125,000 products
Extremely high and very fast material removal rate with cool grinding
High-performance sanding grain and active grinding top layer
Very long service life and low contact pressure
High-performance ceramic abrasive grain
- Use fibre discs only with approved support plates that are in proper working condition.
- Work only with appropriate protective equipment, such as safety glasses, gloves, hearing protection etc.
- Do not store in sunlight, near heat sources, in damp places or on floors.
- Store in the original packaging at 18 - 22°C and 45 - 60% relative humidity.
- Free of iron, chlorine and sulphur (≤ 0.1%)
Datasheets(X)
- For use on hand-held pneumatic or electric angle grinders up to max. 80 m/s circumferential speed in conjunction with a support plate.
- For sanding edges and surfaces, for weld seam preparation and post-processing, for dressing and smoothing.
- For stainless steel; rust, acid and heat-resistant steels (high-alloyed); steel and aluminium
Diameter (Ø) | 125 mm |
Bore diameter | 22.23 mm |
Grid size | 60+ |
Max. rotation speed | 12250 1/min |
Recommended rotation speed | 7500 1/min |
Backing material | Fibre |
Material of abrasive medium | High-performance ceramic grain |
Colour of disc | Red/brown |
Adhesive base | All-synthetic resin with grinding-active additives |
Last viewed
Sealing push-in caps DIN 443, A2 stainless steel, shape A
Work jacket
Metal core drill bit Ruko solid carbide plain Weldon holder
Blind rivet, flat head
Work shorts
Eye bolt with full thread DIN 444, A2 stainless steel, plain, shape LB
ASME B18.5 steel A307 A zinc plated
Hexagonal bolt
Heat protection set SR 583 Sundström T06-0804/T06-0805
Hexalobular-type cheese head screw, low head