CERALINE vulcanised fibre disc
Vulcanised fibre disc CERALINE
FBRDISC-CG-G80+-D178X22,23MM
CERALINE
Register now and access more than 125,000 products
Extremely high and very fast material removal rate with cool grinding
High-performance sanding grain and active grinding top layer
Very long service life and low contact pressure
High-performance ceramic abrasive grain
- Use fibre discs only with approved support plates that are in proper working condition.
- Work only with appropriate protective equipment, such as safety glasses, gloves, hearing protection etc.
- Do not store in sunlight, near heat sources, in damp places or on floors.
- Store in the original packaging at 18 - 22°C and 45 - 60% relative humidity.
- Free of iron, chlorine and sulphur (≤ 0.1%)
Datasheets(X)
- For use on hand-held pneumatic or electric angle grinders up to max. 80 m/s circumferential speed in conjunction with a support plate.
- For sanding edges and surfaces, for weld seam preparation and post-processing, for dressing and smoothing.
- For stainless steel; rust, acid and heat-resistant steels (high-alloyed); steel and aluminium
Diameter (Ø) | 178 mm |
Bore diameter | 22.23 mm |
Grid size | 80+ |
Max. rotation speed | 8500 1/min |
Recommended rotation speed | 5300 1/min |
Backing material | Fibre |
Material of abrasive medium | High-performance ceramic grain |
Colour of disc | Red/brown |
Adhesive base | All-synthetic resin with grinding-active additives |
Last viewed
90° angled bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Spring lock washer In accordance with DIN 127B
Countersunk head screw with square neck DIN 608, steel 10.9, plain
Accessories, hammers Halder 3408 series non-rebound drop mallet
Round head screw with square neck DIN 603, A4 stainless steel
Identification rings, PVC
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Connector, pneumatic
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Low-cut safety shoes, S1P