CUT+COOL Perfect drilling/cutting oil set 30 pieces
Drilling/cutting oil CUT+COOL Perfect advant. pack
DRILLING AND CUTTING OIL ADVANTAGE PACK
Register now and access more than 125,000 products
Safe and efficient to use
- Optimal results and safety for all materials and applications
- Increased tool life
- High corrosion protection
- Weldable without prior cleaning for low quantities
Can be used as minimum quantity lubricant
Highest performance and optimal results due to specially matched components
Reliable performance, even on tools that are not set optimally
Oil-soaked cleaning rags must only be stored in non-flammable, self-closing, tightly sealed and appropriately labelled containers (German regulation BGI 560)! The machining oil is also available as an aerosol under the product designation Cut & Cool Perfect drilling/cutting oil spray (0893 050 008).
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications as well as the storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Water-immiscible cooling lubricant for machining and forming steel, high-alloy steel, aluminium, non-ferrous metal, titanium, carbide, cast metal etc.
The product is applied as it is delivered.
Colour | Yellow orange |
Smell/fragrance | Oil |
Chemical basis | Mineral oil with synthetic ester |
Shelf life from production | 24 Month |
Density | 0.835 g/cm³ |
Density conditions | at 20°C |
Acid-free | Yes |
Chlorine-free | Yes |
Free from heavy metals | Yes |
Min. flashing point | 170 °C |
Silicone-free | Yes |
Resin-free | Yes |
Kinematic oil basis viscosity | 25 mm²/s |
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Concrete screw with countersunk head W-BS/A4
Connector, pneumatic
Work dungarees
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Combi hexagon tapping screw with captive washer
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Twist drill bit HSS DIN 1869 R3 type RN
Plus Quadro-L hammer drill bit