CUT+COOL drilling and cutting oil

Name: CUT+COOL drilling and cutting oil
Brand: Würth
SKU: 0893050004

Drilling/cutting oil CUT+COOL
CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

EAN 4045727238219

All versions

Specification

Multi cutting oil for light to medium machining work

Universal application

Cools even while spraying

Protects tools

Prevents welding of small material particles on the cutting edge

Good creep properties, penetrates even the smallest tolerances

Excellent corrosion protection

Provides lasting protection against further rust and corrosion

No post-treatment or preservation required

Free of silicone, chlorine, resins, and acids

Notice

Free from substances that impair wetting of paint.

Application area

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Multi-purpose cutting oil for light to medium machining.

Instructions

Spray the workpiece from about 20–30 cm.

The product is used as supplied.

Technical information

Contents	400 ml
Container	Aerosol can
Colour	Light brown, Reddish
Smell/fragrance	Perfumed
Chemical basis	Mineral oil
Shelf life from production	18 Month
Density	0.889 g/cm³
Acid-free	Yes
Chlorine-free	Yes
Min. flashing point	190 °C
Silicone-free	Yes
Resin-free	Yes
Kinematic oil basis viscosity	12 mm²/s

	Drilling and cutting oil	Drilling and cutting oil Perfect	Drilling and cutting paste Perfect	Drilling and cutting oil Eco	Drilling and cutting foam	Cutting oil DVGW	Cooling lubricant Ultra	Cooling lubricant Ultra HD
Materials
Steel, alloyed steel	xx	xxx	xxx	xxx	xxx	xx	xx	xxx
High-alloy steel	xx	xxx	xxx	xxx	xxx	xx	xx	xxx
Cast iron, grey cast iron	xx	xxx	xxx	xx	xxx	x	xx	xxx
Tungsten carbide	xx	xxx	xxx	xx	xxx	x	x	xx
Non-ferrous base metal (copper, brass etc.)	xx	xxx	xx	xxx	xxx	x	x	xx
Titanium	x	xxx	xxx	xx	xxx	x	x	xx
Magnesium	x	xxx	xxx	xx	xxx	x	x	xx
Aluminium, aluminium alloys	x	xxx	xxx	xx	xxx	x	xx	xxx
Machining processes
Lathing, automatic lathes	xx	xxx	x	x	x	x	xx	xxx
Drilling, countersinking, reaming	xx	xxx	xxx	xxx	xxx	x	xx	xx
Deep drilling	x	xxx	xxx	xx	xx	x	x	xx
Sawing	xx	xxx	xx	xxx	xxx	x	xx	xx
Thread cutting	xx	xxx	xxx	xxx	xxx	xx	xx	xx
Thread forming, rolling	xx	xxx	xxx	xxx	xxx	x	x	xx
Milling	x	xxx	x	xx	xx	x		xxx
Sanding	x	xxx	x	x	x	x	xxx	xx
Forming, rolling, bending	x	xxx	xx	xx	xx	x	x	xx
Punching, fine punching	x	xx	xx	xx		x	x	x
Broaching, toothing	x	xxx	xx	xxx	xxx	x	x	x
Features
Basis	Mineral oil	Mineral oil with synth. ester	Mineral oil with synth. ester	Synth. ester	Glycol and ester	Ester	Mineral oil	Mineral oil
Viscosity (mm²/s)	12	25	Paste-like	35	n/a	5	66	76
Minimum quantity lubrication		⎷		⎷
Free from mandatory warning symbols			⎷	⎷			⎷	⎷
Can be used overhead			⎷		⎷
DVGW-approved						⎷
Biodegradable/approved for use with food				⎷
Extremely high lubricating performance		⎷	⎷	⎷	⎷			⎷
Extremely long tool life		⎷	⎷	⎷	⎷		⎷	⎷
Minimal smoking		⎷	⎷	⎷	⎷		⎷	⎷
Extremely low consumption			⎷	⎷	⎷			⎷
Good creeping properties	⎷
Free of boric acid			⎷		⎷		⎷	⎷
Low-foaming							⎷	⎷
Extremely high microbial stability							⎷	⎷
Water hazard class	1	1	1	1	2	1	1	1
Formaldehyde-free			⎷		⎷		⎷	⎷
Extremely gentle on the skin (amine-free)			⎷				⎷	⎷
xxx excellent suitability xx good suitability x less favourable suitability ⎷ applicable

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Skin protection foam

SKINPROTFM-CAN-200ML

SKIN

Art.-no. 0890600102

Wash-off skin protection foam prevents soiling by water-soluble and insoluble substances.

x 12 pcs

Acetone cleaner for cleaning and degreasing parts of all kinds

ACETONCLNR-METCLNR-250ML

Art.-no. 0893460

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).