Cabinet handle, type D
Cabinet handle, type D
CABHDNL-HAND-ST-(ZN)-BLUE-200X20MM
Register now and access more than 125,000 products
- Ideal for use on wooden surfaces
For mounting on wooden surfaces, e.g. ASSY countersunk screws with 4.5 mm diameter can be used.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Design | To screw on |
Material | Steel |
Surface | Zinc plated |
Length (A) | 206 mm |
Width (B) | 20 mm |
Handle length | 98 mm |
Material thickness | 4 mm |
Last viewed
Hexagon nut, low profile with fine thread ISO 8675, steel 4, zinc-plated, yellow chromated (A2C)
Low-cut safety shoe S1P Big Runnex Flexstar 5179
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Work jacket
Malleable iron screw clamp with protective caps
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Drill hole marker For marking where access is restricted
Rubber plate For vehicle lifting platforms