Cable box With plastic lid or foam strips

Name: Cable box With plastic lid or foam strips
Brand: Würth
SKU: 0893305703

Cable box
CBLBOX-LONG-THREESIDED-68X280X270MM

Art.-no. 0893305703

EAN 4050641969514

All versions

Similar products

Prices for customers after login

Cable box With plastic lid or foam strips

Art.-no. 0893305703

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Also suitable for waveguides, coaxial cables, bundled pipes and fibre-optic cables

Cables can be retrofitted very easily as there is no need to fill the box interior; all you need to do is seal it off against flue gases with foam strips

With cable installations that already exist, the box can be retrofitted easily by removing the upper side of the box

No dust or dirt is produced by retrofitting cables

Notice

Individual lines of steel, copper or plastic pipe for control purposes with a maximum outside diameter of 15 mm may be routed through. Position up to three boxes side-by-side and up to seven one above another (when using mortar and long type)

Cable support structures such as cable ducts or conduits may not be routed through the cable partition.

Plastic pipes up to a maximum of M 63 (long type) or 40 mm (short type) are used as a precautionary measure to allow for later additions

If the long type is installed in light partition walls, please use an installation frame

Please do not install any construction materials such as mortar inside the box

Long type: For universal use

Short type: Especially suitable for thin walls, as the cable box is only 12.5 cm long or 15 cm long (EASY variant)

Cable box, short type, wall ducts fire-retardant (fh)/fire-resistant (fb) Z-19.53-2450

Cable box, long type, wall and ceiling ducts fire-resistant (fb)/highly fire-resistant (hfb) Z-19.53-2520

Sound test report

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For use in the system [B1]

Fire-resistant (long type and short type) or fire-retardant (short type) fire-resistance class in accordance with DIN 4102.

Cables and electrical lines may be routed through the cable partition. The cable box may only be installed in solid walls at least 10 cm thick, solid ceilings at least 15 cm thick (long type only) and light dividers at least 10 cm thick.

Instructions

The sheet metal housing is installed in the carcass opening using cement mortar or plaster

Alternatively, the EASY cable boxes can be installed with the PURlogic^® EASY mounting foam

The cable box can be completely filled with cables

Finally, trim both foam strips appropriately and seal off the remaining gaps with silicone/PURlogic^® EASY foam so that smoke cannot enter.

Form	Three sided
Height x width x depth	68 x 280 x 270 mm
Type description	Cable box
Depth	270 mm
Height	68 mm

Required accessory:

Product

Description

Quantity

Price
/PU

Neutral silicone For floor and wall joints subject to medium stresses

SILSEAL-NEUT-CLEAR-310ML

Art.-no. 08925301

x 24 pcs

Assembly set For cable boxes

ASMBY-SET-F.CBLBOX

Art.-no. 0893305305

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).