Cable bracket KBB 530
Cable tidy holder KBB 530
CBLHOLD-KBB530-NL42MM-SINGLE
Register now and access more than 125,000 products
- For fast, simple laying of sheathed cables and cable bundles on walls, floors and intermediate floors and covered shafts.
- With pre-mounted nail
- Material: Polyamide
- Colour: grey
- Silicone and halogen-free
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
Concrete substrate (normal weight concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206, solid brick masonry and solid sand-lime brick (KSV)
 | |
Material of padlock shackle | PA - Polyamide |
Colour | Grey |
Material of nail | Steel |
Surface | Zinc plated |
Design | Simple |
Cable type | NYM 3 x 1.5 mm² |
Number of cables | 8 |
Shaft length (SL) | 42 mm |
Shank diameter (ds) | 3.7 mm |
Width (B) | 20 mm |
Grip width (K) | 100 mm |
Grip height (H) | 9.5 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Hilti DX A40, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
ISO insert holder with S clamping system for TC indexable inserts
Intermediate layer for ISO D clamping system
Raised countersunk head tapping screw, shape C with AW drive
Vertical clamp Basic With horizontal base and oil-resistant plastic handle
Cut protection glove
Work dungarees
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Side tool holder For workshop trolleys