Cable tie with mounting eyelet
Special cable tie, plastic latch with eyelet
CBLTIE-CLAMP-BLCK-HEAT-M2,5-2,5X109MM
Register now and access more than 125,000 products
- Weather-resistant material is more resistant to ultraviolet radiation – suitable for indoor and outdoor applications
- For attaching a cable bundle on a different surface, e.g. control panel, wall or ceiling
- The design enables bundling to take place either before or after tightening the clamp cable connector
- One-piece design for consistent performance and reliability
- The rounded tip is easy to grip on surfaces and allows for faster initial insertion for reduced installation time
- UV-resistant and weather-resistant
Datasheets(X)
Width of band (B) | 2.5 mm |
Width | 2.5 mm |
Length (L) | 109 mm |
Material | PA 6.6 - Polyamide |
Min./max. temperature resistance | -40 to 115 °C |
Ultraviolet resistance | Yes |
Colour | Black |
Halogen-free | Yes |
Silicone-free | Yes |
Max. tensile force | 80 N |
Last viewed
Rigid steel-armoured pipe zinc-plated Stapa-Steck-WESV For indoor use (low-corrosion environments)
Butt connector for LFKS sheet steel cable routing conduit
EIFS material 160 g, 4 x 4
White fabric adhesive tape
Vehicle dry abrasive paper disc RED PERFECT®
Round wire snap ring and snap ring groove DIN 9925, A2 stainless steel, for shafts
Hexagonal nut, low profile ISO 4035 steel FK05, zinc flake silver (ZFSHL)
ASME B18.6.3 sst. pan head plain
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Washer ISO 7089 steel 200 HV zinc-plated thick-film passivated with sealing (ZSM)