Welcome to Würth Aerospace Solutions For trade customers only
Cap nut HM for Fixanchor W-FAZ PRO - NUT-CAP-(F.W-FAZ PRO)-HEX-A4-WS17-M10 - 7
Cap nut HM for Fixanchor W-FAZ PRO - NUT-CAP-(F.W-FAZ PRO)-HEX-A4-WS17-M10 - 1
Cap nut HM for Fixanchor W-FAZ PRO - NUT-CAP-(F.W-FAZ PRO)-HEX-A4-WS17-M10 - 2

Cap nut HM for Fixanchor W-FAZ PRO

Cap nut HM W-FAZ PRO
NUT-CAP-(F.W-FAZ PRO)-HEX-A4-WS17-M10

Art.-no. 5930410999
EAN 4065746285575
All versions

Prices for customers after login
Cap nut HM for Fixanchor W-FAZ PRO

Art.-no. 5930410999

Prices for customers after login
Quantity
PU
x 20 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The cap nut for the W-FAZ PRO. Highest performance and maximum safety. Provides an elegant head closure, e.g. for railing fastenings. Zinc-plated steel
  • Special cap nut for use with Fixanchor W-FAZ PRO

  • Visually appealing and elegant head finish

  • Safety for processors and end users, as there is no risk of injury from protruding, sharp-edged stud bolts

  • Application is regulated by European Technical Assessment ETA-20/0229
Notice

The installation instructions must be observed. Before screwing on the HM cap nut, the pin overhang must be checked.

In conjunction with Fixanchor W-FAZ PRO: European Technical Assessment ETA-20/0229 for individual attachment, option 1, cracked and non-cracked concrete:


  • Static or quasi-static exposure (M8-M16)

  • Seismic exposure, performance category C1 and C2 (M8-M16)

  • Fire load R30, R60, R90, R120

Application area

Cap nut HM for use with Fixanchor W-FAZ PRO



  • Fixing point in cracked or non-cracked normal weight concrete C20/25 to C50/60 for pre-positioned, in-place and stand-off installation

  • Ideal for visually demanding mounting with reduced risk of injury

  • Suitable for anchoring medium to heavy loads in concrete: Mounting of e.g. railings, handrails, supports, steel beams etc.

  • Fastenings under seismic conditions in earthquake areas

  • Fastenings under exposure to fire

Thread type x nominal diameter

M10

Height

22 mm

Width across flats

17 mm

Material

Stainless steel A4

Surface

Coated

Suitable for anchor diameter

10 mm

Approval

ETA-20/0229

Product information

Datasheets (0)

Certificates/ Documents (0)

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
1/2 inch socket wrench insert metric, hexagon, long
1/2 inch socket wrench insert metric, hexagon, long

SKTWRNCH-1/2IN-LONG-HEX-WS17

1/2 inch socket wrench insert metric, hexagon, long
1/2 inch socket wrench insert metric, hexagon, long

SKTWRNCH-1/2IN-LONG-HEX-WS19

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
1/2 inch torque wrench with push-through square drive and fine-toothed ratchet head
1/2 inch torque wrench with push-through square drive and fine-toothed ratchet head

TRQWRNCH-PSHTHRG-1/2IN-(20-100NM)

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details