Carbide burr multi-performance TiAlSiN - MILBIT-TC-ZYAS-MULTIPERFM-TIALSIN-D3

Carbide burr multi-performance TiAlSiN - MILBIT-TC-ZYAS-MULTIPERFM-TIALSIN-D3 - 1

Carbide burr multi-performance TiAlSiN

Name: Carbide burr multi-performance TiAlSiN
Brand: Würth
SKU: 0616581030

Carbide burr multi-perf. TiAlSiN
MILBIT-TC-ZYAS-MULTIPERFM-TIALSIN-D3
ZEBRA

Art.-no. 0616581030

EAN 4056807673677

All versions

Similar products

Prices for customers after login

Carbide burr multi-performance TiAlSiN

Art.-no. 0616581030

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

The premium all-rounder with titanium-aluminium-silicon-nitride coating and unique multi-tooth geometry for efficient roughing and smoothing in a single process on almost all materials, such as steel with a hardness < 65 HRC, cast iron, stainless steel, titanium, special alloys and hard and tough materials (e.g. Hardox). Also suitable for non-ferrous metals, such as aluminium alloys > 10% silicon, magnesium alloys, brass, copper, bronze and plastics.

Innovative multi-tooth geometry with a combination of double cut and fine toothing for a shiny, smooth surface finish, smooth milling behaviour and excellent handling

High-end TiAlSiN coating for up to 3x longer service life compared to uncoated burs with conventional double cut system

Up to 50 % higher cutting performance compared to burs with conventional double cut system

Manufactured in accordance with strict quality standards including full inspection of soldered connections

Sustainable product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified^®Bronze

Notice

Wear appropriate protective equipment when using the sanding tip, such as eye protection, hearing protection and protective gloves. Please note the recommended rotation speed (n) and cutting speed (Vc) for the material being processed as well as the tool/material assignments in the overview tables. Before using the sanding tip, please ensure that the tip rotates properly and that the clamping function on the tool drive works correctly. Do not choose a clamping length that is too small. We recommend a minimum clamping length of approx. 2/3 of the shaft length. Discolouration may occur on the shaft due to the extremely high cutting performance. This discolouration is caused by the extremely high temperature that the tool reaches and does not pose a safety risk. Materials are generally processed in reverse rotation. Suitable tool drives: flexible shaft drives, straight grinders, robots, machine tools.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Deburring, working contours, surface machining, weld seam processing, shaping, buffing cast iron, chamfering and rounding edges.

Form	Cylindrical shape with spur cut
Head diameter x cutting edge length	3 x 14 mm
Length	38 mm
Shank diameter	3 mm
Material to be processed	Steel Cast metal Stainless steel Titanium Titanium alloy Special alloy Hard and tough material Non-ferrous metal
Suitable for hardnesses up to	65 HRC
Quality	ZEBRA-Premium
Teeth type	Multi Performance
Cutting material	Carbide
Surface	TiAlSiN
Service life (points system)	4 of 4 points
Cutting efficiency (point system)	3 of 4 points
Surface quality/finish (points system)	3 of 4 points
Versatility (points system)	4 of 4 points
Guiding behaviour (point system)	4 of 4 points
Shank style	Cylindrical

Cutting values
For dia. 3.0-8.0
Material designation	Tensile strength			Dia. 3.0			Dia. 6.0			Dia. 8.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Unalloyed quenched and tempered steels	≤ 850 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Low-alloy quenched and tempered steels	≤ 850 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Nitriding steels	≤ 1,200 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Tool steels	≤ 1,200 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
High-speed steels	≤ 1,200 N/mm²	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Stainless steels
Stainless steels	≤ 850 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Sulphurated stainless steel	≤ 850 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Austenitic stainless steel	≤ 850 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Martensitic stainless steel	≤ 850 N/mm²	250	350	27000	48000	9	13000	19000	18,5	10000	14000	25
Titanium and titanium alloys	≤ 1,200 N/mm²	250	450	27000	48000	9	13000	24000	18,5	10000	18000	25
Special alloys	≤ 1,200 N/mm²	250	450	27000	48000	9	13000	24000	18,5	10000	18000	25
Cast metals
Cast iron	≤ 350 HB	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Spheroidal graphite and malleable iron	≤ 350 HB	450	600	48000	64000	9	24000	32000	18	18000	24000	25
Hard materials
Hardox	≤ 1,400 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Spring steels	≤ 1,100 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Non-ferrous metals
Aluminium cast alloys >10 % Si	≤ 600 N/mm²	250	350	27000	37000	9	13000	19000	18,5	10000	14000	25
Magnesium alloys	≤ 450 N/mm²	250	450	27000	48000	9	13000	24000	18,5	10000	18000	25
Low-alloy copper	≤ 400 N/mm²	600	900	64000	95000	9	32000	48000	18	24000	36000	25
Short-chipping brass	≤ 600 N/mm²	600	900	64000	95000	9	32000	48000	18	24000	36000	25
Long-chipping brass	≤ 600 N/mm²	600	900	64000	95000	9	32000	48000	18	24000	36000	25
Short-chipping bronze	≤ 850 N/mm²	600	900	64000	95000	9	32000	48000	18	24000	36000	25
Long-chipping bronze	≤ 1,000 N/mm²	600	900	64000	95000	9	32000	48000	18	24000	36000	25
Plastics, duroplastic		450	1100	48000	117000	9	24000	59000	18	18000	44000	25
Plastics, thermoplastic		450	1100	48000	117000	9	24000	59000	18	18000	44000	25
Plastics, aramide-fibre-reinforced		450	1100	48000	117000	9	24000	59000	18	18000	44000	25
Plastics, glass-/carbon-fibre-reinforced		450	1100	48000	117000	9	24000	59000	18	18000	44000	25

For dia. 10.0-12.0
Material designation	Tensile strength			Dia. 10.0			Dia. 12.0
		v_c		n		f	n		f
		from	to	from	to		from	to
Steels
General structural steels	≤ 850 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Unalloyed quenched and tempered steels	≤ 850 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Low-alloy quenched and tempered steels	≤ 850 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Unalloyed quenched and tempered steels	≤ 1,000 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Low-alloy quenched and tempered steels	≤ 1,000 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Alloyed quenched and tempered steels	≤ 1,200 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Nitriding steels	≤ 1,200 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Tool steels	≤ 1,200 N/mm²	450	600	14000	19000	31,5	12000	16000	37
High-speed steels	≤ 1,200 N/mm²	450	600	14000	19000	31,5	12000	16000	37
Stainless steels
Stainless steels	≤ 850 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Sulphurated stainless steel	≤ 850 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Austenitic stainless steel	≤ 850 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Martensitic stainless steel	≤ 850 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Titanium and titanium alloys	≤ 1,200 N/mm²	250	450	8000	14000	31,5	7000	12000	36
Special alloys	≤ 1,200 N/mm²	250	450	8000	14000	31,5	7000	12000	36
Cast metals
Cast iron	≤ 350 HB	450	600	14000	19000	31,5	12000	16000	37
Spheroidal graphite and malleable iron	≤ 350 HB	450	600	14000	19000	31,5	12000	16000	37
Hard materials
Hardox	≤ 1,400 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Spring steels	≤ 1,100 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Non-ferrous metals
Aluminium cast alloys >10 % Si	≤ 600 N/mm²	250	350	8000	11000	31	7000	9000	36,5
Magnesium alloys	≤ 450 N/mm²	250	450	8000	14000	31,5	7000	12000	36
Low-alloy copper	≤ 400 N/mm²	600	900	19000	29000	31	16000	24000	37
Short-chipping brass	≤ 600 N/mm²	600	900	19000	29000	31	16000	24000	37
Long-chipping brass	≤ 600 N/mm²	600	900	19000	29000	31	16000	24000	37
Short-chipping bronze	≤ 850 N/mm²	600	900	19000	29000	31	16000	24000	37
Long-chipping bronze	≤ 1,000 N/mm²	600	900	19000	29000	31	16000	24000	37
Plastics, duroplastic		450	1100	14000	35000	31,5	12000	30000	36,5
Plastics, thermoplastic		450	1100	14000	35000	31,5	12000	30000	36,5
Plastics, aramide-fibre-reinforced		450	1100	14000	35000	31,5	12000	30000	36,5
Plastics, glass-/carbon-fibre-reinforced		450	1100	14000	35000	31,5	12000	30000	36,5

Key
v_c = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

Last viewed

Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)

Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)

Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)

W-IP bolt connection, elevated

Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain

Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel

Hammer drill bit Max Quadro-L Vario

3KS Plus additional key

Hot glue gun HKP 300-E

Window construction repair screw, raised countersunk head FBS