Care and lubricant spray

Name: Care and lubricant spray
Brand: Würth
SKU: 0893224

Care and lubricating spray
SLPSPR-300ML

Art.-no. 0893224

EAN 4038898264255

All versions

Prices for customers after login

Care and lubricant spray

Art.-no. 0893224

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Protects and maintains plastic and rubber in vehicles, in technical equipment and in the home

Non-dirty, non-greasy and fully synthetic care and lubricant film

No contamination of clothing upon contact

No dirt or dust adhesion

Anti-slip protection against friction and noises

Eliminates squeaks and creaks on plastics (switches)

Effective, lasting protection

Displaces water and moisture

Does not age, gum up or stick

Provides lasting protection against UV rays

Easy, single-action application saves time

Care and lubricant spray resistant to high temperatures

Higher stability under thermal drying (radiators) - no loss of adhesion

Filled with environmentally-friendly propellant

Silicone-free, resin-free and AOX-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Combination of fully synthetic, low-viscosity and non-greasy oils with additives to protect against ageing, static charge and wear, particularly for plastics.

Instructions

Spray evenly on all surfaces to be maintained. Where necessary, wipe off with a cloth. Maintain a spraying distance of approx. 30 cm. Do not spray on the steering wheel and pedals.

Chemical basis	White oil with additives
Solid lubricant	0 - not applicable
Colour	Transparent
Density	0.739 g/cm³
Smell/fragrance	Characteristic
Min. flashing point	-80 °C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
VOC concentration (CH)	89.56 %
Contents	300 ml
Container	Aerosol can
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.