Carpenter's case 34 pieces
Carpenter's tool case 34 pcs
TL-SET-JOIN-TROLLEY-CASE
Art.-no.
096593902
EAN 4038898446460
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
High-quality, mobile wooden case for use on construction sites and in workshops.
Organised tool storage
For hanging the case over the workbench
Case is portable even when open
Dust proof and lockable version
Contents: 34 pieces
- 1 each of joiners' hammer 230 g, 400 g
- 1 each of drift punch Ø 2 mm, 4 mm
- 1 pair of 2C combination pliers, 180 mm
- 1 pair of pincers, 180 mm
- 2 screw clamps 160 x 80 mm
- 1 Japanese saw, 240 mm blade
- 1 each of 2C screwdriver PZ 1; PZ 2; 1.2 x 7 mm; 1.0 x 5.5 mm; 0.6 x 3.5 mm
- 1 each of wooden bevelled-edge chisel 4, 6, 10, 12, 16, 20 mm
- 1 flat hand engineer's file, cut 2, 200 mm
- 1 rasp, half-round, cut 2, 200 mm
- 2 wooden file handles, 120 mm
- 1 spirit level, 60 cm
- 1 precision square, 250 mm
- 1 precision bevel, 300 mm
- 1 small saw bow, 250 mm
- 1 flat chisel, 25 x 200 mm
- 1 bit box with bit holder PH 1, PH 2, PH 3, PZ 1, PZ 2, PZ 3
- 1 cork sanding block, 100 x 60 x 40 mm
- 1 square reamer, 6 x 100 mm
- 1 2C cutter, 18 mm blade
- 1 decorator's stripping knife, 32 mm
Length | 630 mm |
Width | 270 mm |
Height | 350 mm |
Number of pieces in assortment/set | 34 PCS |
Product information
Datasheets (0)
Certificates/ Documents (0)
Carpenter's case 34 pieces including:
1
x
Description:
1 x 5.5 mm; Blade length: 100 mm
Continuous, brushed chrome-plated shank, hex bolster and 2-component handle with striking cap
Quantity:
1
x
1
x
Description:
1.2 x 7 mm; Blade length: 125 mm
Continuous, brushed chrome-plated shank, hex bolster and 2-component handle with striking cap
Quantity:
1
x
1
x
Description:
0.6 x 3.5 mm; Blade length: 80 mm
Brushed chrome-plated shank and 2-component handle
Quantity:
1
x
1
x
Description:
1
Brushed chrome-plated shank, hex bolster and 2-component handle
Quantity:
1
x
1
x
Description:
2
Brushed chrome-plated shank, hex bolster and 2-component handle
Quantity:
1
x
1
x
Bit box 7 pieces
BIT-MIX-SORT-1/4IN-(PH/PZ1-3)-HOLD
Description:
With 6 bits and one bit holder
Quantity:
1
x
1
x
Description:
Backsaw, very fine toothing
Quantity:
1
x
1
x
Description:
180 mm
For gripping, holding and cutting hard and soft wires and cables
Quantity:
1
x
1
x
Description:
2; File blade length: 200 mm
Quantity:
1
x
1
x
Quantity:
1
x
1
x
Description:
200 mm; Cutting edge width: 25 mm
Quantity:
1
x
1
x
Description:
Width of tip: 2 mm
Quantity:
1
x
1
x
Description:
Width of tip: 4 mm
Quantity:
1
x
1
x
Description:
Length: 60 cm
Robust, low-torsion spirit level with rectangular profile, two vials and smooth side surfaces. Available in different lengths.
Quantity:
1
x
2
x
Description:
For rigid, non-elastic and secure clamping with the high-quality malleable iron bars and protective caps that are gentle on materials
Quantity:
2
x
1
x
Mitre angle
BVLRULE-L300MM
Description:
For transfer of angles
Quantity:
1
x
1
x
Precision steel square
SQUAR-PRECSET-250MM
Quantity:
1
x
1
x
Description:
4 mm
Quantity:
1
x
1
x
Description:
6 mm
Quantity:
1
x
1
x
Description:
10 mm
Quantity:
1
x
1
x
Description:
12 mm
Quantity:
1
x
1
x
Description:
16 mm
Quantity:
1
x
1
x
Description:
20 mm
Quantity:
1
x
1
x
Description:
18 mm
Highly non-slip and ergonomic thanks to high-quality, 2-component handle
Quantity:
1
x
1
x
French, joiners hammer German design in accordance with DIN 5109
CARPHAM-DIN5109-230G
Description:
230 g
With double-curved ash handle
Quantity:
1
x
1
x
French, joiners hammer German design in accordance with DIN 5109
CARPHAM-DIN5109-400G
Description:
400 g
With double-curved ash handle
Quantity:
1
x
1
x
Painters spatula
PNTSPTLA-SST-W32MM
Quantity:
1
x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Last viewed
ASSY® 4 A2 RCS wood façade screw A2 stainless steel plain partial thread raised countersunk head
Safety boots, S2
SC 45° long roughing cutter DIN 6527L
Work trousers
MBS HW cylinder saw
Fleece sanding belt For electric grinding file
Wood screw, pre-assembled EUROFAST® DAMP-H
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
Work trousers
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)
