Casting resin connection sleeve MU 0.6/1 kV - JNTSLEV-CASTRESIN-MU3-(8-25MM)

Casting resin connection sleeve MU 0.6/1 kV - JNTSLEV-CASTRESIN-MU3-(8-25MM) - 1

Casting resin connection sleeve MU 0.6/1 kV - JNTSLEV-CASTRESIN-MU3-(8-25MM) - 2

Casting resin connection sleeve MU 0.6/1 kV - JNTSLEV-CASTRESIN-MU3-(8-25MM) - 3

Casting resin connection sleeve MU 0.6/1 kV - JNTSLEV-CASTRESIN-MU3-(8-25MM) - 4

Casting resin connection sleeve MU 0.6/1 kV

Name: Casting resin connection sleeve MU 0.6/1 kV
Brand: Würth
SKU: 0890450003

Casting resin connection sleeve MU1-6
JNTSLEV-CASTRESIN-MU3-(8-25MM)

Art.-no. 0890450003

EAN 4011231896344

All versions

Prices for customers after login

Casting resin connection sleeve MU 0.6/1 kV

Art.-no. 0890450003

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For connecting wires and plastic or paper-insulated cables up to 1 kV

Advantages of MU casting resin set (including casting resin):

Completely watertight both horizontally and vertically

Approved in accordance with DIN VDE 0165 for explosion-prone areas

High mechanical strength

Advantages of WÜ casting resin:

The casting resin complies with DIN VDE 0291 Part 2 and is suitable up to 10 kV.

High hydrolysis resistance

Long shelf life (24 months)

Good resistance to UV radiation and chemical influences

Low viscosity

Excellent adhesion to metals and plastics

Soft elastic once hardened

Halogen-free

DIN VDE 0278

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application areaSuitable for connecting leads and plastic or paper-insulated cables up to 1 kV. They can be installed outside, underground, in water, indoors and in cable routing conduits.


Type description	MU 3
Min./max. cable diameter	8-25 mm
Cable type	4 x 16 to 5 x 6 mm²
Length x height	216 x 38 mm
Min. cable diameter	8 mm
Max. cable diameter	25 mm
Length	216 mm
Height	38 mm

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.