3D plastic printing FFF print material

Ultrafuse PET

Made from high-quality PET, easy to print and with a large printing operating range.

Ultrafuse Support

Developed for use in combination with Ultrafuse® metal filaments

Ultrafuse TPS 90A

Specially developed for fused filament fabrication, with an exceptional soft-touch surface

Ultrafuse TPU 85A

TPU 85A (Shore hardness 85A) is based on BASF Elastollan®, which is known for its reliability, consistent product quality and cost efficiency.

Ultrafuse TPU 64D

TPU 64D is the hardest elastomer in the flexible product line. It has a relatively high stiffness while maintaining some flexibility.

Ultrafuse TPU 95A

TPU 95A (Shore hardness 95A) is based on Elastollan®, known for its reliability, consistent product quality and cost effectiveness.

Ultrafuse rPET

rPET is a sustainable, high-performance filament made from recycled PET.

F3 PA-CF Pro Fiberthree

Polyamide technical filament modified for 3D printing with additional carbon fibre filler

F3 PA-GF Pro Fiberthree

Polyamide technical filament modified for 3D printing with additional glass fibre filler

F3 PA-GF30 Pro Fiberthree

Polyamide technical filament modified for 3D printing with additional glass fibre filler

F3 PA Pure Pro Fiberthree

Polyamide technical filament modified for 3D printing

Filament Onyx

Le filament Markforged Onyx est composé de nylon PA6 renforcé de microfibres de carbone. Il est 1,4 fois plus résistant et rigide que lABS et peut être renforcé avec nimporte quelle fibre continue.

Nylon White filament

Nylon White parts are smooth, abrasion-resistant and easy to paint.

Carbon fibre

Carbon fibre has the best strength to weight ratio among our reinforcing fibres.

Fibreglass

Fibreglass provides high strength at an affordable price.

HSHT fibreglass

High-strength high-temperature fibreglass (HSHT) has aluminium-like strength and temperature resistance.

Kevlar fibre

Kevlar® has excellent durability and is therefore ideal for parts that are subjected to repeated and sudden loads.

Ultem Carbon Fibre

BioFusion

Extrudr BioFusion is a new generation of special organically based materials developed for designers and makers. The material is available in lively colours. The raw material is approved in accordance with REACH, RoHS and FDA standards.

Dura Pro ABS

DuraPro ABS was specially developed for industrial applications and is marked by its high level of process reliability. It is excellently suited for the production of components under high mechanical stress. The material is electrically insulating. DuraPro ABS is optimised for good layer adhesion, thermal stability, better flow properties and low warping. The raw material is approved in accordance with REACH, RoHS and FDA standards.

Greentec Pearl

Extrudr PEARL is made from renewable raw materials and developed for rapid prototyping applications. The material offers excellent tensile strength properties. The raw material is approved in accordance with REACH, RoHS and FDA standards.

PETG

Polyethylene terephthalate glycol (PETG) is one of the worlds best-known thermoplastic polymers. Extrudr PETG was developed for a wide range of applications for which the main requirement is a good balance between mechanical and optical material properties. The raw material is certified in accordance with FDA, REACH and RoHS standards. PETG is flame-retardant in line with UL 94 with a wall thickness of 3.2 mm.

DuraPro ASA

DuraPro ASA is a weatherproof and UV-resistant copolymer for industrial applications. It is marked by a high level of process reliability and is perfect for components under high mechanical stress. The material is electrically insulating. DuraPro ASA is optimised for good layer adhesion, thermal stability, better flow properties and low warping. The raw material is approved in accordance with REACH, RoHS and FDA standards.

ABS Material4Print

ABS filament that boasts excellent heat resistance and a hard scratch-resistant surface. Due to its many advantages, ABS plastic is used in a variety of applications outside of 3D printing, including in many household and consumer products.

ABS-PC Material4Print

ABS-PC is acrylonitrile butadiene styrene copolymers blended with polycarbonate. The material combines the strengths of both materials and is therefore ideally suited for 3D-printed objects in industrial applications. ABS-PC filament demonstrates an extremely high level of dimensional stability. This outstanding dimensional stability makes ABS-PC filament perfect for technical components, for example.