Inscrivez-vous dès maintenant à la boutique en ligne en 3 clics.
Vente aux professionnels uniquement
Tri
18 article(s) avec 231 versions trouvées
Plunge milling to full groove depth or gradual infeed depth, also for use as end mill for conventional front and circumferential milling.
Pour la finition des aciers à résistance moyenne à haute jusquà 1 200 N/mm² (aciers de construction, aciers cémentés, aciers de trempage), des métaux non ferreux, des aciers résistant à lacide et à la rouille avec des performances de coupe élevées, mais de bonnes propriétés de surface. Particulièrement adaptée au fraisage synchrone.
Wide range of applications for low-strength materials, yet also difficult-to-machine materials including of high strength, e.g. constructions steels through to tool steels. Also suitable, however, for non-ferrous metals, cobalt and nickel alloys, titanium and titanium alloys.
Wide range of applications for low-strength materials, though also difficult-to-machine materials.
High helix, made from powder metallurgical materials for use in extreme machining conditions and for long tool life. High contour precision with low force back, smooth cutting performance with low vibration tendency, excellent surface quality.
Recommended for milling soft to hard, long-chipping materials such as aluminium and copper alloys and thermoplastics.
For finishing steels of medium to high strength up to 1,300 N/mm² (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet excellent surface properties. Especially for synchronous milling.
For finishing steels of medium to high strength up to 1,200 N/mm² (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet good surface properties. Especially for synchronous milling.
Multi-cutting universal end mill. Can be used as a finishing, rough grinding and roughing cutter. Made from powder metallurgical materials for use in extreme machining conditions and for long tool life.
For finishing of steels of average to high strength of up to 1,300 N/mm² with high cutting performance yet good surface properties. Especially for synchronous milling. E.g. construction steels, case-hardened steels and tempering steels, non-ferrous metals, rust and acid-resistant steels.
End mill, twisted end, produced from powder-metallurgical material for application under extreme cutting conditions or for lengthy tool life. High contour precision owing to low push-away action, smooth milling properties owing to low susceptibility to vibration, excellent surface quality.
Can be used with a wide variety of materials owing to its universal geometry. Made from a substrate, SPM, with very high cobalt content. Combines the hardness of SC with the toughness of PM steel.
Recommended for cutting soft to hard, long-chipping materials such as aluminium and copper alloys and thermoplastics.
Recommandée pour le fraisage des matériaux dune résistance moyenne à haute jusquà 1 300 N/mm² et pour les alliages de titane et le titane.
Il y a trop de résultats. Pour un résultat plus précis, veuillez préciser votre recherche.
Veuillez vérifier ou modifier votre recherche.
Ball-nose end mill
Fraise coudée
Fraise d'ébauche
Fraise pour rainures de clavetage
Fraise trois tailles
Fraise à queue HSS
Fraise à rainurer
Fraise à surfacer
