Cavity wax PLUS

Name: Cavity wax PLUS
Brand: Würth
SKU: 0892082100

Cavity wax PLUS
CAVWAX-BEIGE-1000ML

Art.-no. 0892082100

EAN 4061975346421

All versions

Specification

For repairs and long-lasting preservation

High creep capability and very good penetration, effectively protects even hard-to-reach rebates

Water-displacing effect, penetrates and displaces moisture

Free from aromatic compounds, suitable for commercially available paints and rubber and plastic components

High resistance to heat and good flexibility at low temperatures

Optimal corrosion protection from a layer thickness of just 50 µ

VOC reduced

Very high solids content

Yield: Aerosol ±180 g/m² at 50 µ dry/liquid (1,000 ml container) ±80 g/m² at 50 µ dry

Notice

The material temperature should be +10°C to +30°C. After use, turn aerosol can upside down and spray until nozzle is empty.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For long-lasting protection of areas in vehicle body cavities prone to corrosion. Used for subsequent treatment of existing seals and for restoring corrosion protection after accident repair work.

Instructions

Shake can well before use. Apply a thin coat of cavity wax using the pressure cup spray gun and the corresponding probe. Apply the spray directly or using the probe, depending on the area of use. Operating pressure: 6 bar

Technical information

Contents	1000 ml
Weight of content	1040 g
Chemical basis	Mineral oil, paraffin waxes and corrosion protection additives in dearomatized gasoline hydrocarbons
Colour	Beige
Container	Can
Density	1.040 g/ml
Density conditions	at 15°C
Shelf life from production	12 Month
Conditions to maintain shelf life from production	at 10°C to 30°C

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Probe set for UBS cup gun 3 pieces

PRB-SET-F.UBSSPRGUN-3PCS

Art.-no. 0891110001

x 1 pcs

Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products

UBSSPRGUN-CUPGUN

Art.-no. 0891110500

For applying solvent- and water-based stone chip protection, undercoating and cavity sealing products

x 1 pcs

Pressure cup spray gun

SPRGUN-PRESCUP-CAVPROT

Art.-no. 0891130003

For applying cavity sealing products

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).