Centre-grooved dowel pins ISO 8742 steel plain
ISO 8742 steel plain
PIN-CENTGRVD-ISO8742-2,5X10
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2.5 mm |
Length (l) | 10 mm |
Chamfer length (a) | 0.3 mm |
Standards | ISO 8742, DIN 1475 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Drawer divider set BASIC, 18-compartment
Round head screw with square neck DIN 603, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Watertight plug housing TE Superseal 1.5 series assortment 440 pcs without system case 4.4.1
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Countersunk screw with hexalobular head
Flat square For FB windowsill duct
Slotted screwdriver, laser tip With hexagon shank
Engine sealing compound Silicone Special 180
Vehicle dry abrasive paper disc RED PERFECT®