Centrifugal brush, power drill Klingspor BPS 600 W
Tapered brush w. shank corrug. BPS 600 W Klingspor
CENTFUGBRSH-KLINGSPOR-358347-D25-ST
Register now and access more than 125,000 products
For fine machining and for removing light burrs in pipes or holes
Ideally suited for machining and cleaning moulds and die-cast parts
Very soft and adaptable tool
Datasheets(X)
Diameter (D1) | 25 mm |
Sleeve diameter (D2) | 0 mm |
Usable length of wire (H) | 25 mm |
Wire diameter | 0.3 mm |
Length (L) | 75 mm |
Shank diameter (S) | 6 mm |
Material of wire | Steel |
Design | Corrugated |
Max. rotation speed | 18000 rpm |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Drill gauge For 3D hinges with 2 bolts, 16 mm
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Cetus overall
Smoke alarm Pyrexx® PX-1
Overlapping cover cap, for hexalobular socket and AW drive
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Blind rivet, flat head with grooved shank