Ceramic abrasive grain sanding belt For tube belt sander
Sanding belt for tube belt sander ceramic grain
SNDBL-CLTH-CG-G120-30X610MM
ZEBRA
Register now and access more than 125,000 products
Special micro-fragmentation
Considerably more sharp grinding edges, resulting in extremely high material removal without high grinding pressure, finer and more uniform surface quality, up to four times longer service life compared with zirconia alumina.
Grinding additives
Very cool cut, no material discolouration
Inconel® brand name of Special Metals Corporation
Datasheets(X)
Materials to be processed: Stainless steel; rust, acid and heat-resistant steel (high-alloyed), such as Inconel®, steel and non-ferrous metals
Width x length | 30 mm x 610 mm |
Grid size | 120 |
Suitable machines | Rüggeberg UBS 11/90 Si-R |
Material of abrasive medium | Ceramic grain |
Backing material | X-polyester |
Last viewed
Single rosette
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
System case empty range 4.4.1
Slotted cheese head
Countersunk head screw
Slidebox H84 drawer
Clip fastening belt
Abrasive/sticker wheel Mirka Coarse Cut
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain
Split pin ISO 1234 A4-70 stainless steel, plain