Ceramic abrasive grain sanding belt For tube belt sander
Sanding belt for tube belt sander ceramic grain
SNDBL-CLTH-CG-G80-30X533
ZEBRA
Register now and access more than 125,000 products
Special micro-fragmentation
Considerably more sharp grinding edges, resulting in extremely high material removal without high grinding pressure, finer and more uniform surface quality, up to four times longer service life compared with zirconia alumina.
Grinding additives
Very cool cut, no material discolouration
Inconel® brand name of Special Metals Corporation
Datasheets(X)
Materials to be processed: Stainless steel; rust, acid and heat-resistant steel (high-alloyed), such as Inconel®, steel and non-ferrous metals
Width x length | 30 mm x 533 mm |
Grid size | 80 |
Suitable machines | Rüggeberg UBS 5/70 Si-R |
Material of abrasive medium | Ceramic grain |
Backing material | Y-polyester |
Last viewed
Low-cut safety shoes, S1P
End cap For aluminium recessed handle, L shape, open, horizontal
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Small surface paint roller WB/LM For solvent-based and water-based paints
Random orbital sander, pneumatic Mirka ROS 650DB
90° HSCo WN type RN TiAlN NC spotting drill bit
Hose clamp with asymmetrical lock
Blind rivet, 120° countersunk head
Screw tap, machine, blind hole Ruko M DIN 371 HSCo VAP shape C
Mechanic's glove