Welcome to Würth Aerospace Solutions For trade customers only

Chainsaw oil TRIATHLON® ISO VG 100

Chainsaw oil TRIATHLON
ENGOIL-(CHAINSAW-ISO-VG-100)-60LTR
TRIATHLON

Art.-no. 0897009094
EAN 4049557753423

Prices for customers after login
Chainsaw oil TRIATHLON® ISO VG 100

Art.-no. 0897009094

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Wear-inhibiting chainsaw oil for power saw chains and gate saws

Optimum lubrication and protection against wear of all moving parts such as chain links and chain joints


Excellent adhesive properties and optimum lubricating properties.



Enables year-round use, even at high or low outdoor temperatures


Favourable viscosity at various temperatures.

Notice

Observe the specifications of the power saw and chain manufacturer.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Triathlon chainsaw oil ISO VG 100 is a mineral, high-performance oil of selected base oils for continuous loss lubrication of chains in power saws, gate saws, etc.

Instructions

Observe the specifications of the power saw and chain manufacturer

Contents

60 l

Chemical basis

Mineral oil

Shelf life from production

60 Month

Density

0.89 g/cm³

Density conditions

at 15°C

Min. flashing point

200 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information