Chair and box angle bracket
Chair and box angle steel zinc plated
CHR/CABBRKT-(A2K)-150/150MM
Register now and access more than 125,000 products
- Holes countersunk and offset on either side for optimised mounting
- For arm lengths up to 75 mm: 2 bore holes
- For arm lengths from 90 mm: 3 bore holes
- Sheet steel galvanised on both sides (St37 + A2K)
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Datasheets(X)
Non load-bearing connection of lightweight wooden structures such as boxes, packaging, furniture, chairs or securing battens without structural attachment.
ASSY 4 and ASSYplus countersunk head screws are suitable fasteners in line with ETA 11/0190
 | |
Limb length x limb length 2 | 150 x 150 mm |
Width of side | 25 mm |
Thickness | 3 mm |
Number of holes in subcarrier nJ + main carrier nH | 3 + 3 PCS |
Diameter of hole | 6.3 mm |
Material | Steel |
Surface | Zinc plated |
Weight | 165 g |
Last viewed
Spring plunger with thrust pin
Hexagonal bolt with thread up to the head
Spring lock washer
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Head strap Sundström R06-4001
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Round head screw with square neck DIN 603, A4 stainless steel
Protective glove, electrics
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain