Chair and box angle bracket
Chair and box angle steel zinc plated
CHR/CABBRKT-(A2K)-30/30MM
Register now and access more than 125,000 products
- Holes countersunk and offset on either side for optimised mounting
- For arm lengths up to 75 mm: 2 bore holes
- For arm lengths from 90 mm: 3 bore holes
- Sheet steel galvanised on both sides (St37 + A2K)
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Datasheets(X)
Non load-bearing connection of lightweight wooden structures such as boxes, packaging, furniture, chairs or securing battens without structural attachment.
ASSY 4 and ASSYplus countersunk head screws are suitable fasteners in line with ETA 11/0190
 | |
Limb length x limb length 2 | 30 x 30 mm |
Width of side | 14 mm |
Thickness | 2 mm |
Number of holes in subcarrier nJ + main carrier nH | 2 + 2 PCS |
Diameter of hole | 4.1 mm |
Material | Steel |
Surface | Zinc plated |
Weight | 10 g |
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Twist drill bit HSS DIN 1897 type RN
Hexagon nut with clamping piece (all-metal) ISO 7042, steel, strength class 8, zinc-nickel-plated, black (ZNBHL)
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Edge sanding belt Klingspor PS 29 F ACT
Ring lock washer Narrow shape
Jeans
Reducing nipple, imperial thread EN10242 N4 shape II, hot-dip galvanised malleable iron
Safety boots, S3
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain