Chair and box angle bracket
Chair and box angle steel zinc plated
CHR/CABBRKT-(A2K)-50/50MM
Register now and access more than 125,000 products
- Holes countersunk and offset on either side for optimised mounting
- For arm lengths up to 75 mm: 2 bore holes
- For arm lengths from 90 mm: 3 bore holes
- Sheet steel galvanised on both sides (St37 + A2K)
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Datasheets(X)
Non load-bearing connection of lightweight wooden structures such as boxes, packaging, furniture, chairs or securing battens without structural attachment.
ASSY 4 and ASSYplus countersunk head screws are suitable fasteners in line with ETA 11/0190
 | |
Limb length x limb length 2 | 50 x 50 mm |
Width of side | 15 mm |
Thickness | 2 mm |
Number of holes in subcarrier nJ + main carrier nH | 2 + 2 PCS |
Diameter of hole | 4.4 mm |
Material | Steel |
Surface | Zinc plated |
Weight | 19 g |
Last viewed
ASSY®plus 4 CSMP universal screw Hardened zinc-plated steel, partial thread, countersunk milling pocket head
Steel nail with riveted washer and discontinuous longitudinal corrugation
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Work dungarees
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon head bolt With thin shaft in hygienic design
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, thick-film passivated (ZSML)
Work dungarees Cetus
ISO insert holder with S clamping system for CC indexable inserts
Spare spray head for foaming For REFILLO® cans