Charger 12 volt AL 30-LI For rechargeable battery LI 10.8 volt and 12 volt
Charger 12 volt AL 30-LI
CHRG-(AL30-LI)
Register now and access more than 125,000 products
Datasheets(X)
Type description | AL 30-LI |
Min./max. output voltage | 10.8-12 V/DC |
Suitable batteries | LI 10.8 Volt |
Min./max. frequency | 50 / 60 Hz |
Max. charging current | 3 A |
Cable length | 1.60 m |
Length | 170 mm |
Width | 125 mm |
Height | 70 mm |
Max. output voltage | 12 V/DC |
Max. frequency | 60 Hz |
Min. frequency | 50 Hz |
Max. input voltage | 253 V/AC |
Charging time | 30 min |
Min./max. temperature conditions | 0 to 40 °C |
Min./max. input voltage | 207-253 V/AC |
Max. temperature conditions | 40 °C |
Min. temperature conditions | 0 °C |
Product weight (per item) | 458 g |
Min. output voltage | 10.8 V/DC |
WEEE (taking back waste electrical and electronic equipment) | 5 |
Nominal voltage | 230 V/AC |
Last viewed
CLIP-O-FLEX® holder Varioflex extended, open Bracket without base with extended opening
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Continuously adjustable one-ear clamp
pias® wing-type drilling screw, flat countersunk head with AW drive
Knob cylinder 3KS
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S1P
VS TAL Broom hook strip For ceiling installation