Charger 12 volt AL 40-LI For rechargeable battery LI 10.8 volt and 12 volt
Charger AL 40-LI
CHRG-(AL40-LI)
Register now and access more than 125,000 products
Datasheets(X)
Type description | AL 40-LI |
Input voltage | 12 V |
Min./max. output voltage | 10.8-12 V/DC |
Suitable batteries | LI 10.8 Volt, LI 12 Volt |
Min./max. frequency | 50 / 60 Hz |
Max. charging current | 4 A |
Cable length | 1.60 m |
Length | 170 mm |
Width | 125 mm |
Height | 70 mm |
Max. output voltage | 12 V/DC |
Max. frequency | 60 Hz |
Min. frequency | 50 Hz |
Power output | 1 W |
Max. input voltage | 253 V/AC |
IP protection class | 0 - not applicable |
Charging time | 30 min |
Min./max. temperature conditions | 0 to 45 °C |
Min./max. input voltage | 207-253 V/AC |
Max. temperature conditions | 45 °C |
Min. temperature conditions | 0 °C |
Product weight (per item) | 540.000 g |
Min. output voltage | 10.8 V/DC |
Plug type | 0 - not applicable |
WEEE (taking back waste electrical and electronic equipment) | 5 |
Nominal voltage | 230 V/AC |
Output voltage | 12 V |
Last viewed
Useit® Superpad wood sanding disc
Double cylinder S5 locking system
Wide brush LM ECONOMY For solvent-based paints
Wood screw Hexagon head DIN 571, steel zinc-plated blue
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Metric double open-end wrench DIN 3110/ISO 1085
Car tyre valve, sport rims
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Pneumatic air nozzle For injection system W-VIZ