Charger clamp Fully insulated, 1,000 A
Charger clamp, fully insulated, 1000 A
CHRGCLMP-CAST-FULLINSU-BLACK-1000A
Register now and access more than 125,000 products
- Galvanised cast brass; with copper-mesh strip as terminal connection
- Cold-resistant insulation (Escorena Ultra EVA)
- Cable connection up to 50 mm2, with serrated screw
- Opening angle: 45°/30 mm
- Weight: 320 g
Datasheets(X)
Max. current | 1000 A |
Colour | Black |
Length | 150 mm |
Opening angle | 45 Degree |
Width of mouth | 30 mm |
Max. wire cross section | 50 mm² |
Last viewed
Square spacer piece For beam clamp support clips type BF2
Slotted flat-head screws with shoulder Shape B - with undercut
Twist drill bit HSS DIN 338 type RN 130°
Hexagon Socket Head Cap Screw
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
Centre-grooved dowel pins ISO 8742 steel plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Reserve taper grooved dowel pins ISO 8741 steel zinc-plated
Trailer net With reinforced edge cord
Compression cable lug DIN 46235