Charger for Easy Puller dent repair system
Charger for dent repair system Easy Puller
CHRG-DNTREPSYS-115X75X65MM
Register now and access more than 125,000 products
Datasheets(X)
Input voltage | 264 V/AC |
Min./max. output voltage | 100-240 V |
Suitable batteries | 0 - not applicable |
Min./max. frequency | 60 / 60 Hz |
Max. charging current | 2 A |
Cable length | 1500 mm |
Length | 115 mm |
Width | 75 mm |
Height | 65 mm |
Last viewed
Stretch X winter softshell jacket
Blanking plug for rubber module
Rivet nut with flat head and knurled shank
Low-cut safety shoes, S1
Countersunk screw with hexalobular head ISO 14581, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
HPC end mill Speedcut 4.0-Inox, short, optional, four cutting edges, uneven angle of twist gradient
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Retrofit step For aluminium runged stepladders
Tungsten carbide bur with MX teeth
Hooked blade in dispenser