Chassis tie With round head
Chassis tie with round head
CBLTIE-PLA-SPECIAL-ONEHOLEMNT-375MM
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
(Outer diameter 25 mm) and hole centring (drill 11-12 mm hole)
- Can be released again if only tied loosely
- Can be closed on both sides as both sides are toothed
- Weather-resistant, suitable for use outdoors and in sunny locations
Product information
Datasheets(X)
Width of band (B) | 7.6 mm |
Width | 7.6 mm |
Length (L) | 375 mm |
Min. drill hole diameter | 11 mm |
Max. drill hole diameter | 12 mm |
Material | PA 6.6 - Polyamide |
Min./max. temperature resistance | -40 to 105 °C |
Ultraviolet resistance | Yes |
Colour | Black |
Last viewed
Wheel brush Steel, knotted, with shank
ORSYmat
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
ASME B18.8.1 steel zinc-plated
PZ rosette set
Bodywork file blade
3/8" cardan joint insert short
Cable grommet with perforated membrane CR
Milling bit Ruko tungsten carbide milling bit type G ogival (SPG) TiCN
Concrete screw with hexagon head W-BS/S