Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance f9
ISO 7379/WN 7379 tolerance f9 steel 012.9 plain
SCR-CYL-ISO7379-012.9-F9-DS8-M6X80
Register now and access more than 125,000 products
- Shoulder screws are often used where screw connections are expected to absorb lateral forces or where the position of the workpieces in relation to one another needs to be safeguarded.
- Shaft with tolerance class f9
The shoulder shank diameter differs from ISO 7379 for the following thread diameters:
- M5 = shank diameter 6 mm
- M10 = shank diameter 12 mm
- M20 = shank diameter 24 mm
Due to the geometry, these screws can only be loaded to a limited extent in the ultimate load test according to ISO 898-1 and are marked with a 0 in front of the actual strength class.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 80 mm |
Shank diameter (d2) | 8 mm |
Head diameter (dk) | 13 mm |
Head height (k1) | 5.5 mm |
Standards | ISO 7379 |
Material | Steel |
Property class | 012.9 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Socket head |
Drive type | Hexagon socket |
Internal drive | HS4 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Tolerance class | f9 |
Thread length (metric thread) (l2) | 11.25 mm |
Design | With fit shaft |
Product class | A |
Last viewed
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Flat brush LM ECONOMY For solvent-based paints
Leather protective glove Ejendals TEGERA® 360
Countersunk head screw with hexagon socket, full thread
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Hexagonal bolt with thread up to the head
Frame Nova Pro Scala H186 For H186 drawers
Plumber's sealing screw, A2 stainless steel
Hexagonal bolt with shank ISO 4014, steel 10.9, plain