Circlip DIN 471, spring steel
DIN 471 steel mech. applied zinc standard version
CRCLIP-SHFT-DIN471-A-(MZN)-20X1,2
Register now and access more than 125,000 products
For safely limiting freedom of movement — even when there are rotary movements of machine parts on shafts and in bore holes at a predefined level.
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can be used even at high speeds
- The rings can be removed quickly and easily using the correct pliers
Datasheets(X)
 | |
Suitable for shafts | 20 mm |
Suitable for groove diameter | 19 mm |
Internal diameter (d1) | 18.5 mm |
Outer diameter (d1) | 28.4 mm |
Eye width (a1) | 4.0 mm |
Width (b1) | 2.6 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Square escutcheon handle pair
Contact spray SW
Hole saw HW
Stud with threaded end ≈ 2d
Screw fitting elbow angle 90°, metal thread, metric, PA6 MOP BS SGA
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
SH perforated sleeve for injection systems
Welder clothing
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Knitted protective gloves with coating Uvex HexArmor® PointGuard® Ultra 9032