Circlip DIN 471, spring steel
DIN 471 steel mech. applied zinc standard version
CRCLIP-SHFT-DIN471-A-(MZN)-25X1,2
Register now and access more than 125,000 products
For safely limiting freedom of movement — even when there are rotary movements of machine parts on shafts and in bore holes at a predefined level.
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can be used even at high speeds
- The rings can be removed quickly and easily using the correct pliers
Datasheets(X)
 | |
Suitable for shafts | 25 mm |
Suitable for groove diameter | 23.9 mm |
Internal diameter (d1) | 23.2 mm |
Outer diameter (d1) | 34.2 mm |
Eye width (a1) | 4.4 mm |
Width (b1) | 3.0 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Work dungarees
Work coat
Hexagon nut, high profile with fine thread
Hexagon nut, low profile, with clamping piece (non-metal insert) ISO 10511, A4/035 stainless steel, plain
Hexagon nut, high profile with clamping piece (all-metal nut) fine thread ISO 10513, steel 8, zinc-plated, blue passivated (A2K)
Hexagon nut
EPS profile double cylinder
Three prong knob with insert nut Hollow hub
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A