Circlip DIN 471, spring steel
DIN 471 steel mech. applied zinc standard version
CRCLIP-SHFT-DIN471-A-(MZN)-28X1,5
Register now and access more than 125,000 products
For safely limiting freedom of movement — even when there are rotary movements of machine parts on shafts and in bore holes at a predefined level.
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can be used even at high speeds
- The rings can be removed quickly and easily using the correct pliers
 | |
Suitable for shafts | 28 mm |
Suitable for groove diameter | 26.6 mm |
Internal diameter (d1) | 25.9 mm |
Outer diameter (d1) | 37.9 mm |
Eye width (a1) | 4.7 mm |
Width (b1) | 3.2 mm |
Thickness (s1) | 1.5 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Tapered pin, unhardened
Hammer drill bit Plus Quadro-S
Countersunk screw, type SK/S — cotter-pin installation DIN 7991 (ISO 10462) steel grade 8.8, zinc plated blue, with countersunk washer, steel, zinc plated blue
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
EPS profile thumbturn cylinder
Countersunk head screw with recessed head, H ISO 7046-2, A4-70 stainless steel, plain
Cross handle with perforated blank bushing
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
A 502 FS Click door handle
