Circlip DIN 471, spring steel
DIN 471 steel mech. applied zinc standard version
CRCLIP-SHFT-DIN471-A-(MZN)-50X2
Register now and access more than 125,000 products
For safely limiting freedom of movement — even when there are rotary movements of machine parts on shafts and in bore holes at a predefined level.
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can be used even at high speeds
- The rings can be removed quickly and easily using the correct pliers
Datasheets(X)
 | |
Suitable for shafts | 50 mm |
Suitable for groove diameter | 47 mm |
Internal diameter (d1) | 45.8 mm |
Outer diameter (d1) | 64.5 mm |
Eye width (a1) | 6.9 mm |
Width (b1) | 5.1 mm |
Thickness (s1) | 2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Akura 44 profile double cylinder
Handle sleeve For packaging film
Carbon monoxide detector Ei208iDWC
Pan head tapping screw, shape C with AW drive
Paint spray, high gloss
Twist drill bit, metal Ruko DIN 338 HSS-G TiAlN
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)
Steel wire broom
Insulation holder W-DH
Glazing packer