Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CIRCLIP DIN 471 78X2,5
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 78 mm |
Suitable for groove diameter | 75 mm |
Internal diameter (d1) | 73.5 mm |
Eye width (a1) | 8.6 mm |
Width (b1) | 7.3 mm |
Thickness (s1) | 3 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Taper-grooved dowel pin ISO 8745 steel plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
Slotted cylinder head screw ISO 1207, brass, plain
Wire cable barrel terminal with right-handed thread
Hexagonal bolt
Hexalobular screw with flattened half round head DIN 34805-1, TX drive, A2-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Grooved taper-pin ISO 8744 steel plain
Cross handle with stud
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)