Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-108X4,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
 | |
Suitable for shafts | 108 mm |
Suitable for groove diameter | 104 mm |
Internal diameter (d1) | 100 mm |
Eye width (a1) | 10 mm |
Width (b1) | 9.5 mm |
Thickness (s1) | 4 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Material lift box
EPDM sealing tape Outdoors
Barrel roller bearing FAG
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Hexalobular screw with flattened half round head DIN 34805-1, TX drive, A2-070 stainless steel, plain
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head
Deep groove ball bearing FAG
Countersunk screw with hexagon socket head
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB