Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-305X5,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 305 mm |
Suitable for groove diameter | 295 mm |
Internal diameter (d1) | 288 mm |
Eye width (a1) | 20.2 mm |
Width (b1) | 20 mm |
Thickness (s1) | 5 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
Hexagon nut with fine thread DIN 934, A2 stainless steel, plain
Pipe cable lug Without inspection hole
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Release tool, vehicle-specific assortment 13 pieces
Hexagon nut with trapezoidal thread
EASYLUX 12 V/24 V wireless door contact switch
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Work jacket
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread (ISO-compliant). Steel, 8.8U, hot-dip galvanised (hdg).