Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-395X6,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 395 mm |
Suitable for groove diameter | 385 mm |
Internal diameter (d1) | 378 mm |
Eye width (a1) | 20.2 mm |
Width (b1) | 20 mm |
Thickness (s1) | 6 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Stretch X softshell jacket
Segment bow handle
HPC Speedcut 4.0 Inox end mill, long, optional, four blades, uneven angle of twist gradient, with internal cooling, HA shank
Anti-roll-off edging For cabinet covers of system cabinets
Cetus work dungarees
Cutting disc Klingspor A 46 TZ Special
Fibreglass rod For CPS cable feed device
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6