Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-420X7,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
 | |
Suitable for shafts | 420 mm |
Suitable for groove diameter | 408 mm |
Internal diameter (d1) | 400 mm |
Eye width (a1) | 20.2 mm |
Width (b1) | 20 mm |
Thickness (s1) | 7 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Safety shoe S3 Jalas 9568
Hexagonal bolt, with thread to head and fine thread
Hexagon nut, low profile, with clamping piece (non-metal insert)
Taper-grooved dowel pin DIN 1471, A1 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Winter softshell jacket Stretch X
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Round cable passage in two parts
TIPP® Aero ventilation pipe clamp
PVC single core H05/H07V-K, fine wire