Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-68X2,5
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 68 mm |
Suitable for groove diameter | 65 mm |
Internal diameter (d1) | 63.5 mm |
Eye width (a1) | 8 mm |
Width (b1) | 6.5 mm |
Thickness (s1) | 2.5 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Cut protection glove
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYA) without spur cut TiCN
Hexagon nut, low profile, with clamping piece (non-metal insert)
Ring segment for core drill bit Klingspor DO 900 B Special
Electromagnetic hold-open device, single-leaf With GTS 630 and integrated smoke detector
E 6.3 PZ bit (1/4 inch)
Pure aluminium adhesive tape
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Wire feed roller For MM 350 welding systems
Key, high profile DIN 6885, stainless steel 1.4571, shape A